Check the listing for details. NEW Jandel Engineering Cylindrical Four(4) Point Probe Sensor Head CYL-1.0-60-TC. Condition: New – Open box. Listed at 1434.99 USD. NEW Jandel Engineering Cylindrical Four(4) Point Probe Sensor Head Comes with what you see in the pictures. If you don't see it, you probably won't get it. Specifications are from Jandel engineering and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit is new, old stock surplus from a spare parts room at a semiconductor fab that closed down. I'm pretty sure the Jandel ordering code would be: CYL-1.0-60-TC-100 but it is not marked on the unit so I am not 100% sure. The Unit's Serial Number Tag Reads: Serial Number: A271013 Spacing: 1.0 mm Grams: 60+ Material: TC (Tungsten Carbide) Tip Radii: 25 µ Description: Jandel Probes are made almost entirely of non-magnetic materials except for the piano wire springs. Most of the probes have an aluminum body, nosepiece, and upper guide. The tips are tungsten carbide and include jewel bearings, i.e. upper and lower synthetic ruby needle guides. There are a few tiny stainless steel screws used. The standard temperature limit for the Cylindrical probe is +120°C. Specifications: Probe Spacing: 1.0 mm Tolerance: ±0.01 mm Arrangement: Linear Needles: Solid Tungsten carbide Ø 0.40 mm (Ø 0.30 mm for close-spacing). 45° included angle, phosphor-bronze connecting ligament Radii: 25 µm polished with 2 µm diamond Retraction to Insulating Pad: 0.5 mm or better Loads: High: 60-150 g Leads: 4-awy cable, Teflon insulated (this unit has a D-Sub 9 pin male connector) - screened Electrical Leakage: 1013 ohms resistance between needles at 500 volts For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 04/11/23