| Brand | OSG |
|---|---|
| End Type | Drill Point, Stub |
| Number Of Flutes | 2 |
| Unit Type | Unit |
| End Mill Type | Point Stub Drill |
| Overall Length | 2-1/2 in |
| Material | Solid Carbide |
| Unit Quantity | 1-3-2026-G. Box Met. LH. C. |
| Country of Origin | Japan |
| Length Of Cut | 1/4 in |
| Mill Diameter | 1/4 in |
| Shank Diameter | 1/4 in |
Check the listing for details. OSG EDP: 3330640, 6.4MM A BRAND ADF-2D, DRILLING, SOLID - DRILLING, STUB 5700. Condition: New – Open box, Made in Japan. Listed at 49.99 USD. Length of Cut - Specification STUB.
You may also like
$58.72
Value Collection 1/2" Diam, Fine Pitch, 2" LOC, 4 Flute Cobalt Roughing Squar...
$42.49
Micro 100 RS-312-2 Blank - Split End 2-1/2” OAL (I46)
$19.99
NEW CTMI USA 3/64" DIA. X 3/16" LOC X 1-1/2" OAL 4FL CC CARBIDE SQUARE ENDMILL
$27.2
9/64" Double-Ended End Mill, HSS, 2-Flute, 3/8" Shank, USA Made
$249.95
Kyocera / SGS 25mm 4 Flute Carbide Sq Endmill 25mm Shank 43195 (LOC1453B)
$12.89
Quinco Tool 4 Flutes 1" Diameter H.S End Mill
$24.4
29/64" Double-Ended End Mill, HSS, 4-Flute, 1/2" Shank, by MDX
$124.95
GWS 3/4" 4 Flute Carbide Long CR Endmill 3/4" Shank .120" R 316773 (LOC2440)
$260
IMCO 65512-W Carbide Tool M525N 5F .015R 1 x 1 x 1-1/4 x 4 WF enDURO Mill
$68.95
Haas 5/16" Carbide End Mill, 4 Flute, Hybrid AlCrN Coated 0.015" Radius, HSPM2
$30
.312" X .5" LOC X .286"NECK X 1.75" REACH, 3/8" SHANK, 3-FLUTE CARBIDE ENDMILL
$34.6
Haas 1/16" Carbide End Mill, 4 Flute, Hybrid AlCrN Coated 0.002" Chamfer, HSPM2