Check the listing for details. PAC LocPRO Advanced 4-CH Active Line Output Converter w/Remote Control LPA-E.4. Condition: New. Listed at 89.00 USD. Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. Don't forget to follow us and visit frequently for the latest deals. Our dedicated customer service team is here to assist you promptly and professionally as we turn your automotive aspirations into reality! This fixed-price listing includes the PAC LPA-E.4 LocPRO advanced two channel line output converter. It features incredible input power capabilities, enhanced output controls, and noise isolation countermeasures. Combined with the newest vehicle systems' compatibility, these features are the gateway for your audio aspirations. One of the best ways to add an amplifier or powered subwoofer to a factory system is with a line output converter (LOC), which reduces the factory system's high-level outputs down to the preamp-level signals your aftermarket amp can handle. PAC's LPA-E.4 LocPro Advanced line output converter will work with just about any factory system, even amplified premium systems, to help you add an aftermarket amplifier in your vehicle. The LPA-E.4 active line output converter lets you add an amp without affecting the existing factory system — you just tap into the wires going to a pair of full-range speakers for the LPA-1.2's inputs. Selectable load resistance and ground isolation options ensure trouble-free OEM integration. A gain control with a clip light adjusts the signal level for optimum strength and fidelity. A low-pass filter and bass boost fine-tune the bass to sound its best. The wired remote is included, so you can control the bass level from your front seat.What's included? LPA-E.4 Converter unitBass level controllerInstallation Instructions LPA-E.4 FeaturesAluminum housing40V / 400W maximum @ 20kΩLow pass filter (CH3/4 only)Bass boost (CH3/4 only)Dual variable gain controls Selectable ground (common, ISO or 200Ω)Load selections: 20Ω, 60Ω, 20KΩClip indicatorTurn-on mode selection (remote and DC)9.5V Output voltageRemovable quick-connect with screw-type terminalWide range DC offset4 Channel In & 4 Channel Out Unfiltered OR 2 Channel In & 4 Channel Out UnfilteredIndependent Clip Indicator for Front and Rear*LPA-REM Bass level controller included* Model Number: LPA-E.4 Channels: 4 IN – 4 OUT Operating Voltage: 9V – 16V Max Input Level (20kHΩ Load Setting): 40V / 400W at 4 Ohms Auto Turn On: DC Offset / Remote Output Voltage MAX at 13.8V: 9.5V RMS Turn On Trigger (DC-Offset): 3V-7V Load Input Impedance: 20Ω, 60Ω, 20kΩ Output Impedance: 110dBA at 6.4V Output THD+N: