Check the listing for details. Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte |.... Condition: New. Listed at 73.60 USD. Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte | Low Temp 40 °F Polyurethane HD Aliphatic Polyurethane 2K Floor Coating RainguardPro® Polyurethane HD Aliphatic Poly Urethane 2K is a two-component, high performance, zero-VOC, odorless, water-based, aliphatic polyurethane paint/coating. Polyurethane HD provides years of excellent protection against harsh weather conditions, UV exposure, corrosion, physical damage, and has elastomeric properties. Polyurethane HD acts as a breatheable elastomeric waterproofer and can be applied in low temperature conditions down to 40 °F. This product may be sprayed, brushed, or roller applied. Polyurethane HD is unique in that it has no VOC’s due to its total water-based formulation. When fully cured, this product has good chemical acid resistance, UV protection, excellent water resistance, abrasion resistance, flexibility, and is totally environmentally safe. Polyurethane HD Aliphatic Polyurethane is a two component product and is packaged in 32 oz, 1 gallon and 4 gallon kits. It is available with 3 gloss level options; matte, satin and high gloss finish and in a non-yellowing clear or in a pre-tinted white. It Has IsoFree Technology So That When Part B Is Mixed With Part A, The crosslink reaction makes the combined product free of any isocyanates. Thereby the product is safe to apply for both the applicator and the environment with zero voc's. What comes in a kit? Part A Part B Kit Makes*: 26 Fl. Oz. 1 Fl. Oz. 1 Quart 112 Fl. Oz. 4 Fl. Oz. 1 Gallon 448 Fl. Oz. 16 Fl. Oz. 4 Gallons After mixing the components, may be reduced with water. Typical spray applications require a 5% to 10% reduction. Do not exceed 15% Where is Polyurethane HD Aliphatic Urethane used? Warehouses Tile Floors and Walls (Glazed and Unglazed) Food and Beverage Facilities USDA Inspected Facilities* Commercial Vehicles Airports Stadiums Sound Walls Direct-To-Metal (Must use primer first) Warehouse Floors Garage Floors Why Polyurethane HD Coating? Scratch Resistant Great Chemical and acid resistance MEK Double rub @50% solids Passed 2,000 Cycles Test Non-yellowing & UV resistant topcoat Apply Direct-to-metal* and concrete Excellent as a protective floor coating, or topcoat applied over a primer epoxy, as a high-gloss, chemical/acid resistant topcoat for industrial concrete flooring applications Breatheable elastomeric waterproofer Zero VOC- SCAQMD Compliant Choice of High Gloss, Satin or Matte Finish Comes in Clear or White Color Excellent Adhesion Use on wide range of surfaces including Concrete, Block, Brick, Wood, Painted Metal, Tile (glazed & unglazed) *Do not use on bare ferrous metal. Only apply to ferrous metal that is properly prepped and primed to receive a water based coating. SPECIFICATIONS Solids by Weight Clear 60% (+/-2%) Pigmented 66% (+/-2%) Solids by Volume 50% VOC 0 g/L (mixed) Colors Clear and white Recommended Film Thickness 3-4 mils wet, 1.5-2 mils dry (Do not apply over 5 mils wet) Coverage per Gallon 250 - 400 sq'/gal @3-4 mils wet thickness Packaging 32 oz kit, 1 gallon kit, 4 gallon kit Mix Ratio 2.25:1 mix ratio by volume Shelf Life 1 year in unopened container Finish High gloss (>90 at 60 degrees @glossmeter) Gloss Loss