Check the listing for details. Printed Circuit Boards Silver Epoxy Glue Electrically Conductive 902LP, 2.5gm. Condition: New. Listed at 19.99 USD. Technical Product Bulletin PURE SILVER FILLED ELECTRICALLY CONDUCTIVE EPOXY LONG POT LIFE EPOXY ADHESIVE PRODUCT DESCRIPTION:AA-DUCT 902LP is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with anelectrical resistivity value of less than 1x10-4 ohm-cm. AA-DUCT 902LP is also characterized by a wide operating temperature range from –50 to +170°C. AA-DUCT 902LP is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. PRODUCT PROPERTIES: Appearance Silver Cure Type Heat cure or Room temperature Benefits High strength Perfect bond Cold solder for heat sensitive components Mix Ratio by weight 100:6 / Resin:Hardener Substrates AluminumCopperMagnesiumSteelBronzeNickelKovarCeramicGlassPhenolicG-10 epoxy glass boards. Typical Applications ElectricalConductiveRmi/efi shieldingCircuitryPrinted circuit board Electronics repair UNCURED PROPERTIES: Viscosity @ 25 °C cps Paste Specific Gravity, mixed 2.79 Reactive solids contents, % 100 Pot Life 3 hours Shelf life 1 Year CURE SCHEDULE: 2 minutes @ 120°C 5 minutes @ 100°C 24 hours @ 25°C CURED PROPERTIES: Hardness, Shore D 85 Shrinkage linear in/in 0.003 Tensile Strength, psi 9500 Volume Resistivity ohm. cm