Check the listing for details. Quest Flying Model Rocket Payloader One Single Bulk Pack Kit, No fancy packaging. Condition: New. Listed at 14.02 USD. Quest Flying Model Rocket Kit Payloader One Single Bulk Pack Kit, No fancy packaging QST 1018Bk Quest Payloader One from a bulk pack to save on cost Skill Level 1 for beginners. 14" Parachute Recovery Laser Cut Balsa Fins Self Adhesive Decals Body Tube Slots to Support Thru The Wall Fin Construction Clear Payload Dimension: (2.5cm) x (8.8cm) 14" Parachute Recovery Length: 16.25"(41.3cm) Diameter: 0.984"(2.5cm) Weight: 1.13oz(32g) Engines (Motors): Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ, C12-4FJ, C126FJ, D16-6FJ, D16-8FJ Quest Q-Jet™ White Lightning™: B6-4W, C18-4W, C18-6W, D20-6W, D20-8W Estes: A8-3, B6-4, C6-5 Altitude(Estimated Max): 1200'(366m) Model Rocket Kits are rated by Skill Level 1 Beginner 2 Intermediate 3 Advanced 4 Expert 5 Master If you are just starting in the hobby start at the beginner level and move up from there at your own pace. What is needed to build and fly All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include: Scissors, Hobby Knife Ruler Wood Glue, Model Cement or CA(Super Glue) Sandpaper Masking Tape Finishing Supplies like: Wood Filler Sealer/Primer Paint Launching Equipment and Supplies like: Recovery wadding Launch Pad Launch Controller Power supply Model Rocket Motors and Igniters A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html