| Restocking Fee | No |
|---|---|
| Return shipping will be paid by | Buyer |
| All returns accepted | Returns Accepted |
| Item must be returned within | 30 Days |
| Refund will be given as | Money back or replacement (buyer's choice) |
| Brand | Radial Engineering |
| Preamp Type | Channel Strip |
| Model | Gold Digger |
| MPN | Gold Digger |
Check the listing for details. Radial Engineering Gold Digger 4-Channel Mic Selector New. Condition: New. Listed at 439.99 USD. Radial Engineering Gold Digger 4-Channel Mic Selector New!!! Authorized Dealer!!! The Gold Digger 4-Channel Mic Selector from Radial Engineering enables you to quickly compare the sound of 4 different microphones while sharing the same preamp. A straight wire passive circuit design is void of any audio buffers or transformers. This unit uses military-grade gold contact relays to manage the switching process, thus ensuring the mic signal is maintained without introducing color, distortion, or artifacts of any kind. The Gold Digger features 4 rear-mounted XLR-F mic inputs plus an XLR-M output to feed the preamp. To eliminate bleed between microphones, each channel is equipped with a radio-style selector switch that ensures only one mic is on at a time. The external supply provides power for the LED indicators, charges the relays, and enables the Gold Digger to generate 48V phantom, which can be turned on or off for each mic as needed. To ensure an honest comparison between microphones, individual ‘set & forget’ trim controls let you adjust each mic level so that they produce the same relative output. Once set up, the Gold Digger not only helps to improve the workflow, but it gives the artist more confidence with the sound of the vocal, resulting in a better overall performance. Four selectable inputs with trim adjusts Straight wire distortion-free signal path Will not introduce color or artifact Increases artist's confidence when recording Circuit Type Passive signal path with active relay switching Frequency Response 20 Hz to 20 kHz THD + N 0.0003% Dynamic Range -140 dBu Equivalent Input Noise -115 dBu CMRR -92 dB @ 55 Hz Input Impedance 600 Ω nominal Output Impedance Same as source impedance Configuration XLR: Follows AES Spec: pin-1 ground, pin-2 hot (+), pin-3 cold (-) Power Requirement 15 VDC / 150 mA Dimensions (W x H x D) 5.80 x 1.88 x 4.50" (147.30 x 47.75 x 114.30 mm) Weight 2.10 lb (0.95 kg)