Check the listing for details. Replacement Leatherette Leather Sheet Cover Skin DIY Camera Refresh 0.7mm Thick. Condition: New. Listed at 9.47 USD. Do you have a camera that is looking a little shabby? Is the leather coming off of your vintage camera? Give it some new life with new leatherette. You're buying 1 Sheet of replacement self-adhesive leatherette - 190mm x 140mm (approximately 7 1/2 inches x 5 1/2 inches) It is approximately 0.7mm or 27 mil thick. It has a nice soft textured feeling. Cut it easily with scissors. **** Tips: Remove the old covering first and use it as a template to cut out the new leatherette in the proper shape and size. Before applying - it is very important to remove the old glue / adhesive completely. You CANNOT put this on top of the old glue. Tips to help with old leatherette and glue removal: • Heat up the old leatherette a bit using a hair dryer - more of the glue will stay on the old leatherette. • Use nail polish remover (non-acetone) and a rag and/or q-tips to help scrape off the old glue. • Patience - sometimes (not always) it will take some time - but it can’t be stressed enough how important it is to get the old glue off. Application tips: • Make sure everything is at room temperature. • Removing buttons, levers or memo holders may be needed for proper application. • One trick you can use is to spread a drop or two of hand sanitizer on the adhesive side - this will allow you to position the leatherette more easily - once the sanitizer evaporates the adhesive gets sticky again. • Tweezers or something else small will help to push it into the small nooks and crannys. • Occasionally on tight bends, you may need to add a drop of glue to ensure solid adhesion. • Once you're sure of the positioning press firmly to get the best adhesion - you may need to keep it pressed down for a minute while you wait for the hand sanitizer to evaporate. • Please let the camera sit for a couple days after finished - this helps everything to set. Feel free to contact me if you have any questions or concerns. Thanks for looking