Check the listing for details. Replacement Remote for Hunter Ceiling Fan Handheld Remote Control K6266-02. Condition: New. Listed at 16.99 USD. Replacement Remote Hunter Ceiling Fan Handheld Remote Control K6266-02 For Hunter Ceiling Fans Color Options: Black This is a direct replacement for remote numbers: K6266-01, -02, -06, -07, -12, -13 DOES NOT include wall mounting bracket Wireless receiver is not included Requires 1 X CR2025 or CR2032 Battery (included) Part #K6266 FCC ID: IN2TX45 or IN2TX50 FREQ: 434 MHz Part #K6266 must match for compatibility. Please inquire if you're not sure. Pairing Instructions: Please note: The fan will not function until the remote control is successfully paired. Ensure the remote is powered (remove the blue insulating tab from the battery compartment). Switch off the breaker that supplies power to the fan. Keep it off for 1 minute before switching it back on. Within 3 minutes of turning the power back on, press and hold the pairing button on the remote (simultaneously press the Light Button and the Up Arrow Button). If the pairing is successful, the light will flash. If the light does not flash, turn off the power to your fan again, wait for 1 minute, and then try the pairing process again. If you are using the transmitter with multiple fans, repeat the pairing process for each fan. If your fan is a pull-chain model, please ensure that the pull-chain control is set to the High speed position for the remote to operate correctly.