Check the listing for details. Rocketarium Flying Model Rocket Kit Black Brant IV Canadian Sounding Rocket 1/10. Condition: New. Listed at 47.49 USD. Rocketarium Flying Model Rocket Kit Black Brant IV Canadian Sounding Rocket 1/10 Scale ROC-RK-1013 22 Laser Cut Parts Plastic nose cone and transition Ejection Baffle (no wadding required) 18" Nylon Parachute Over 43" Tall Requires 3/16" Launch Rod Intermediate Assembly Skills Required Recommended Engines:D12-5, E12-6 E15-7, E20-7, E30-7, F44-8 E18-7, E28-7, F24-7 Specifications Length: 43.9" (111 cm) Diameter: 1.72" (43.7 mm) Weight: 5.54 oz. (157 g) Motor Mount: 24 mm. Recovery System: 18" Nylon Parachute, Ejection Baffle Projected Max Altitude: 1650 ft. (500 m) Description Original Black Brant IV was a two-stage rocket consisting of Black Brant V first stage with the Black Brant III second stage and was used by Canadian Space Agency and NASA. This kit is a single-stage model of Black Brant IV Model Rocket Kits are rated by Skill Level 1 Beginner 2 Intermediate 3 Advanced 4 Expert 5 Master If you are just starting in the hobby start at the beginner level and move up from there at your own pace. What is needed to build and fly All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include: Scissors, Hobby Knife Ruler Wood Glue, Model Cement or CA(Super Glue) Sandpaper Masking Tape Finishing Supplies like: Wood Filler Sealer/Primer Paint Launching Equipment and Supplies like: Recovery wadding Launch Pad Launch Controller Power supply Model Rocket Motors and Igniters A safe place to fly using guidelines from the National Association of Rocketry Safety Code