Check the listing for details. Rocketarium Flying Model Rocket Kit MIM-23 Hawk ROC RK-1047. Condition: New. Listed at 36.89 USD. Rocketarium Flying Model Rocket Kit MIM-23 Hawk ROC RK-1047 Uses D or E MotorsEjection Baffle (no wadding required)Laser Cut Fins3D-Printed Tail ConePlastic ParachuteOver 21" TallIntermediate Assembly Skills RequiredRecommended Engines (apogee ft): C11-3 (250), D12-5 (600), E12-6 (950), 24E22-6 (820), 26E31-6 (890) Length: 22.9"(58.2cm)Diameter: 1.64"(42mm)Estimated Weight without motors: 146g3/16" Launch LugsThis is a model kit of MIM-23 HAWK surface-to-air missile. The kit comes with 24mm Motor Mount and Balsa fins and channels. We supplied pre-marked tubes, so kit is not difficult to build. This is an "easy-to-paint" modelRequires:Motor, Igniter/starterLaunch PadLaunch Controller3/16" Launch RodeBond Wood GlueSand PaperHobby KnifePrimer & Paint Model Rocket Kits are rated by Skill Level1 Beginner2 Intermediate3 Advanced4 Expert5 MasterIf you are just starting in the hobby start at the beginner level and move up from there at your own pace.What is needed to build and flyAll model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include:Scissors, Hobby KnifeRulerWood Glue, Model Cement or CA(Super Glue)SandpaperMasking TapeFinishing Supplies like:Wood FillerSealer/PrimerPaintLaunching Equipment and Supplies like:Recovery waddingLaunch PadLaunch ControllerPower supplyModel Rocket Motors and IgnitersA safe place to fly using guidelines from the National Association of Rocketry Safety Code