Check the listing for details. Rocketarium Flying Model Rocket Kit Trident T263-29mm ROC-RK-1063. Condition: New. Listed at 89.99 USD. Rocketarium Flying Model Rocket Kit Trident 29mm ROC-RK-1063Skill Level: 2The largest in the ARG Trident Series. The ARG Trident is a flying model based on the EnerJet 2250 sounding rocket originally produced in 1972. Trident Cluster Series features a payload bay and offers adventurous rocketeers the whopping lift power of three engine cluster flights. This rocket can be launched with 29mm motors.PartsThis Rocket comes with laser-cut plywood centering rings and fins, plastic nose cone, 30" nylon parachute, conforming rail lugs and stainless steel welded eye-bolt.This 47" tall rocket must be launched from 1" rail.Challenges2 types of glue (epoxy and carpenter's) used to build this model. 3 Motors need to be friction-fitSpecificationsLength: 47" Diameter: 2.63" Weight: 24.7 oz. (700g)Motor Mount: 3 x 29mmRecovery System: 30" Parachute (included)Projected Max Altitude: 3300 ft. (1100m)Recommended Engines: 3 x E16-6, F5-8, F20-7, F23-7, F26-9, F27-8, F42-8, F50-9, G40-10 Model Rocket Kits are rated by Skill Level1 Beginner2 Intermediate3 Advanced4 Expert5 MasterIf you are just starting in the hobby start at the beginner level and move up from there at your own pace.What is needed to build and flyAll model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include:Scissors, Hobby KnifeRulerWood Glue, Model Cement or CA(Super Glue)SandpaperMasking TapeFinishing Supplies like:Wood FillerSealer/PrimerPaintLaunching Equipment and Supplies like:Recovery waddingLaunch PadLaunch ControllerPower supplyModel Rocket Motors and IgnitersA safe place to fly using guidelines from the National Association of Rocketry Safety Code