Check the listing for details. Sample & Hold with Noise Source for Eurorack Synthesizers -- NEW. Condition: New. Listed at 63.00 USD. The Circuit Slices "Sample + Noise" is a dual-function module for Eurorack-compatible synthesizers. Packed in a narrow 4HP panel is a classic analog ‘sample & hold’ circuit and an analog noise source with three outputs – white, pink, and low frequency noise. The sampled voltages are typically routed to a VCO’s CV input or another module’s CV input. Patch one of the noise outputs into the Sample & Hold IN with a pulse patched to CLOCK, for cool random sequences. Specifications Noise output level: Factory set to about +/- 5V (10Vpp) User Adjustable from +/- 10V to +/-3V Noise output bands -- White (flat-band) -- Pink (low-pass filtered to 3dB/octave for a less ‘bright’ or muffled noise signal.) -- LF (very low, non-periodic ‘frequency’ near 8 Hz. Useful as a random CV.) Noise source: amplified transistor junction noise S&H CLOCK trigger level: >1V (any level greater than 1V) The S&H circuit samples and outputs voltage levels in the +/- 10V range. Connections: Standard 3.5mm jacks Depth: 37mm Panel width: 4 HP Power required: +12VDC @ 20mA, -12DC @ 17mA, using a standard Eurorack 10-pin power connection Features Classic analog ‘sample & hold’ and noise circuits in a narrow 4 HP module Three noise outputs – white and two filtered Adjustable noise output level Low cost, due to modern surface-mount manufacturing production DIY expansion option for the use of an internal clock source Low power consumption (20mA or less per supply) Includes power cable and case screws User manual The user manual is available as a downloadable PDF. Find the link near the bottom of the circuit slices home page.