Check the listing for details. Silver-Bond 79 Silver Epoxy Adhesive, One Part, Electrically Conductive, Bonding. Condition: New. Listed at 19.99 USD. SINGLE COMPONENT, MICROELECTRONIC CONDUCTIVE EPOXY ADHESIVE PRODUCT DESCRIPTION:**Product requires 120C/350F for about 1 hour to cure/harden. Silver-Bond 79 Silver Epoxy Adhesive, One Part, Electrically Conductive, Bonding is a fast curing one part epoxy adhesive with superior electrical conductivity and bonding capability. Silver-Bond 79 Silver Epoxy Adhesive, One Part, Electrically Conductive, Bonding has been shown to retain their properties through hundreds of hours of rapid temperature cycling and has also high impact absorption and stress resistance.PRODUCT PROPERTIES:AppearanceSilverCure TypeHeat cureBenefitsHigh strength Excellent mechanical, electrical propertiesSubstratesExcellent choice for Integrated Circuits, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.Operating Temperature-40C to 175 CNASA OutgassingPassesThixotropic Index3.4Pot Life6 monthsTypical ApplicationApplications where high impact absorption and stress resistance is requiredUNCURED PROPERTIES:Viscosity @ 25 C cps65,000 @ Temperature 77.0 FShelf Life6 monthsAdhesive Bond Strength1750 psiDensity3.5Thermal Conductivity, W/m.K0.90Coefficient of Thermal Expansion57x 10^-6 (in/in) CLap Shear Strength, PSI9200CURE SCHEDULE:10 minutes@ 150C1 hour@ 125CCURED PROPERTIES:Hardness, Shore D86Volume Resistivity ohm-cm3 x 10-4ELECTRICAL PROPERTIES:Glass Transition Temp, Tg45.0 C, 113 FGENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply Silver-Bond 79 Silver Epoxy Adhesive, One Part, Electrically Conductive, Bonding completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.AVAILABILITY: This epoxy can be supplied in various different packages. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.