Check the listing for details. Siser EasyReflective Silver Iron On HTV For T-Shirt 20" *Multiple Lengths*. Condition: New. Listed at 8.33 USD. EasyReflective® Heat Transfer VinylSiser’s only pressure sensitive reflective HTV!EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.EasyReflective keeps you safe by being reflective AND by being CPSIA Compliant! That means it’s safe for use on children’s apparel!Specifications:PET Composition • Pressure sensitive backing • Reflective finish • 140 Microns/5.5 Mils• 45°/60° blade • Top layer onlyCUTTER SETTINGSCricut:Blade: StandardSetting: Iron-OnSilhouette Cameo:Blade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8Force: 6Scan N Cut:Blade: Standard, 2Cut Speed: 1Cut Pressure: 1Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/sGraphtec:Blade: 45°Gram Force: 9-10Tool: CB09U+0Speed: 30 cm/sMH, SC2, LP3, Titan 1:Blade: 45°/60°Gram Force: 80-85Speed: 300 mm/s*Blade Advancing VariesTitan 2 & 3Blade: 45°/60°Gram Force: 60-65Speed: 300mm/s*Blade Advancing VariesSettings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs.APPLICATION INSTRUCTIONSApplication Instructions (home iron)• Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 10-15 seconds• If areas of design lift after application, replace cover sheetand re-press for 10 seconds• Peel carrier warmApplication Instructions (heat press)• Cut in Reverse• Weed excess material• Preheat garment for 2-3 seconds• Apply design at 305°F/150°C• Use medium pressure for 15 seconds• Peel carrier warm (at least 15 seconds off press)RECOMMENDED ACCESSORIES & CAREEasyReflective Applies to:100% cottonPoly/cotton blends100% polyesterNylon (testing recommended)Recommended Accessories:Siser WeederLaundering:Wait 24 hours before 1st washMachine wash warm or cold / mild detergentCan be machine dried on low but hanging item to dry will preserve reflective qualityDo not dry clean