Check the listing for details. Studio Technologies MODEL-5304 Advanced 4ch intercom user device Dante audio-ove. Condition: New. Listed at 985.11 USD. Simplify your on-site communications setup with the Studio Technologies Dante audio over Ethernet capable Model 5304 Intercom Station. The 5304 features four independent talk and listen channels and a host of configurable parameters allowing it to fit seamlessly into a wide range of applications. From on-air broadcasting to corporate AV, the 5304 provides easy configuration and control via the STcontroller software app, and it's all handled over a standard Ethernet connection. The unit also draws power from that same connection, which means only a single cable run is required for bi-directional Dante audio, power, configuration, and control. The unit can be configured as a call center for a virtual "party-line" intercom system with other compatible devices. Five rotary controls and push buttons on the front panel facilitate level control and signal/call routing respectively. The rotary controls can also display a multi-color level meter for the input signal and the channel status. The Model-5304 boasts a high headroom, low noise input preamp that ensures a wide dynamic range, so you hear only what you want and nothing you don't. An integrated compressor circuit helps keep levels consistent to avoid signal overload.Studio Technologies MODEL-5304 Applications:On-air broadcastingLive event communicationTheaterIndustrialAerospaceHouse of worshipCorporate AVStudio Technologies MODEL-5304 Features:Dante audio-over-Ethernet technologyFour independent talk and listen channelsSupports dynamic and electret microphones5-pin female XLR headset connectorUses STcontroller for configurationTwo remote control inputsCall send and receive functionsExcellent audio qualityAES67 and Dante Domain Manager supportPower-over-Ethernet (PoE) poweredStudio Technologies MODEL-5304 Specifications:Power Source: Power-over-Ethernet (PoE): class 2 (low power, ≤6.49 watts) per IEEE® 802.3afNetwork Audio Technology:Type: Dante audio-over-EthernetAES67-2018 Support: yes, selectable on/offDante Domain Manager (DDM) Support: yesBit Depth: up to 24Sample Rate: 48 kHzPull-Up/Down Support: noDante Transmitter (Output) Channels: 4Dante Receiver (Input) Channels: 4Dante Audio Flows: 4; 2 transmitter, 2 receiverTransmitter (Output) and Receiver (Input) Nominal Level: –20 dBFSAudio Channels: 4 talk, 4 listenNetwork Interface:Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)Power-over-Ethernet (PoE): Per IEEE 802.3afData Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)Microphone Input:Compatibility: analog dynamic or electret microphonesType: unbalancedElectret Microphone Power: 3.3 volts DC via 2 k (2000) ohms series resistance, selectable on/offGain: 24, 30, 36, 42, or 48 dB, selectableFrequency Response: 42 Hz to 18 kHz, –3 dB, nominalDistortion (THD+N):Noise Floor: –94 dBFS (A-weighted)Compressor:Threshold: 1.5 dB above nominal level (–18.5 dBFS)Slope: 2:1Headphone Output:Type: 2-channelCompatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headsets with nominal impedance of 50 ohms or greaterMaximum Output Voltage: 2.9 Vrms, 1 kHz, with 150 ohm loadFrequency Response: 7 Hz to 9.8 kHz, –3 dBDistortion (THD+N):Dynamic Range: >100 dBCall Send Function:Signaling Method: 20 kHz, within selected Dante transmitter (output) audio channelsSend Level: –20 dBFSCall Receive Function:Sources: Dante receiver (input) channels 1-4Signaling Method: 20 kHz +/-800 Hz, nominal, within audio channelsReceive Level: –27 dBFS minimumDetect Time: 10 milliseconds, minimumRemote Control Inputs: 2Function: configurable, can mimic the action of any of the five button functionsType: active low, 1 mA maximum, inputs pulled up to 3.3 volts DC via 3.4 k (3400) ohm resistorsConnectors:Headset: 5-pin female XLREthernet: RJ45 jackRemote Control Inputs: 3-conductor (TRS) 3.5 mm jackUSB: type A receptacle (used only for updating application firmware)Configuration: requires Studio Technologies' STcontroller software applicationSoftware Updating: USB flash drive used for updating application firmware; Dante Updater application for updating Dante interface firmwareEnvironmental:Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)Humidity: 0 to 95%, non-condensingAltitude: not characterizedDimensions (Overall):8.70 inches wide (22.1 cm)1.72 inches high (4.4 cm)4.45 inches deep (11.3 cm)Weight: 0.95 pounds (0.42 kg); rack-mounting installation kits add approximately 0.2 pounds (0.09 kg)Deployment: intended for tabletop applications. Four optional mounting kits are also available:RMBK-10 allows one unit to be mounted in a panel cutout or on a flat surfaceRMBK-11 allows one unit to be mounted in the left- or right-side of one space (1U) of a standard 19-inch rackRMBK-12 allows two units to be mounted in one space (1U) of a standard 19-inch rackRMBK-13 allows one unit to be mounted in the center of one space (1U) of a standard 19-inch rack