Check the listing for details. TILTING ROTARY TABLE 4" WITH 100MM SELF CENTERING CHUCK & SINGLE BOLT TAILSTOCK. Condition: New. Listed at 310.03 USD. Rotary Table 4" TiltingHor/vert Rotary Table 4" Tilting.Table height 66 mm in flat positionTable graduated 360 degrees in 5 degree divisions4 SlotsBase is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mmThe table tilts upto 90 degrees and can be used anywhere100 mm Self Centering Chuck( 3 Jaw) with 100mm BackplateOur Chuck is Hardened and ground working surfaces prolong life while ensuring continuous accuracy and repeatability.Both sides of the jaw teeth and guides are ground and hardened to HRC 58-62.Each set of jaws are serialised in their own set.Supplied with 100mm Backplate suitable for 100 mm self centering chuckSINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3" / 4" This Tailstock is mostly used in between our Rotary Table 3" , Rotary Table 3" Tilting, Rotary Table 4" , Rotary Table 4" Tilting and Rotary Table HV4 Models.It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground.It is made up of good grade of cast iron.It is Very useful product to use.