Check the listing for details. Vega Swing 63 Vibrating Level Switch. Condition: Used. Listed at 299.00 USD. Vega Swing 63 Vibrating Level SwitchThree units available - one purchase = one unit Application area The VEGASWING 63 is used as a universal vibrating level switch for all liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection in vessels. The position of the switching point is determined via the tube extension. The VEGASWING 63 offers maximum reliability and safety in a wide application range. Your benefit • Minimum time and cost expenditure due to simple setup without medium • Precise and reliable function due to product-independent switching point • Low maintenance costs Function The heart of the sensor is the vibration drive by which the tuning fork is energized to vibrate at its resonance frequency. When covered with medium, the frequency of the fork decreases. This frequency change is processed by the integrated electronics and converted into a switching command. With the tuning fork with only 38 mm length, the VEGASWING work reliably independent of the installation position in any liquid. Pressure, temperature, foam, viscosity and the composition of the liquid do not influence the switching accuracy. Technical data Process pressure -1 … +64 bar/-100 … +6400 kPa (-14.5 … +928 psig) The function of the instrument is ensured up to an operating pressure of 100 bar/10000 kPa (1450 psig) at a maximum process temperature of +50 °C (+122 °F) (only with threaded versions). Process temperature -50 … +250 °C (-58 … +482 °F) Viscosity - dynamic 0.1 … 10000 mPa s Density 0.7 … 2.5 g/cm³ (0.025 … 0.09 lbs/in³); 0.5 … 2.5 g/cm³ (0.018 … 0.09 lbs/in³) by switching over Ambient temperature -40 … +70 °C (-40 … +158 °F) Hysteresis approx. 2 mm (0.08 in) with vertical installation Process fitting Threads from G¾, ¾ NPT, flanges from DN 25, 1", hygienic fittings Operating voltage 20 … 253 V AC, 50/60 Hz; 20 … 72 V DC Power consumption 1 … 8 VA (AC), approximately 1.5 W (DC) Switching voltage max. 253 V AC/DC Switching current max. 3 A AC (cos phi > 0,9), 1 A DC Breaking capacity min. 50 mW, max. 750 VA AC, 40 W DC (with U < 40 V DC) SIL qualification Optionally up to SIL2