Check the listing for details. Victron Energy SMARTSOLAR 150/45-TR 45A MPPT Solar Charge Controller contrôleur. Color: Blue, Condition: New. Listed at 555.90 USD. Victron Energy SmartSolar 150/45-Tr 45A MPPT Charge ControllerBluetooth Smart built-inThe wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.Ultra-fast Maximum Power Point Tracking (MPPT)Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.Advanced Maximum Power Point Detection in case of partial shading conditionsIf partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.Outstanding conversion efficiencyNo cooling fan. Maximum efficiency exceeds 98%.Flexible charge algorithmFully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).Extensive electronic protectionOver-temperature protection and power derating when temperature is high.PV short circuit and PV reverse polarity protection.PV reverse current protection.Internal temperature sensorCompensates absorption and float charge voltage for temperature.Optional external battery voltage and temperature sensing via BluetoothA Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.VE.DirectFor a wired data connection to a Color Control GX, other GX products, PC or other devicesRemote on-offTo connect for example to a VE.BUS BMS.Programmable relayCan be programmed to trip on an alarm, or other events.Optional: SmartSolar pluggable LCD displaySimply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. SmartSolar Charge Controller 150/45 Battery voltage 12 / 24 / 48V Auto Select Rated charge current 45A Nominal PV power, 12V 650W Nominal PV power, 24V 1300W Nominal PV power, 36V 1950W Nominal PV power, 48V 2600W Max. PV short circuit current 50A Maximum PV open circuit voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Maximum efficiency 98% Self-consumption Less than 35mA @ 12V / 20mA @ 48V Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) Charge voltage 'float' Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth) Charge voltage 'equalization' Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable) Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Temperature compensation -16 mV / -32 mV / -64 mV / °C Protection PV reverse polarity / Output short circuit / Over temperature Operating temperature -30 to +60°C (full rated output up to 40°C) Humidity 95%, non-condensing Maximum altitude 5000m (full rated output up to 2000m) Environmental condition Indoor, unconditioned Pollution degree PD3 Data communication port VE.Direct or Bluetooth Remote on/off Yes (2 pole connector) Programmable relay DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC Parallel operation Yes (not synchronized) ENCLOSURE Colour Blue (RAL 5012) PV terminals 35 mm² / AWG2 (Tr models) Battery terminals 35mm² / AWG2 Protection category IP43 (electronic components), IP22 (connection area) Weight 3 kg Dimensions (h x w x d) 185 x 250 x 95 mm STANDARDS Safety EN/IEC 62109-1, UL 1741, CSA C22.2