Check the listing for details. Z Automotive BurnBox G2 Z-BB-G2. Condition: New. Listed at 219.77 USD. OME / BURNBOXBurnBox G2 Security Bypass Modules1 Security Bypass ModulesDo you have a 2018+ vehicle? You may need to add one of these Security bypasses Modules.Security Gateway Bypass ModuleRequired for use in 2018-2021 Grand Cherokee, Durango Double BypassThe Double-Bypass is a securitygateway bypass for thefollowing vehicles:2018-2023 Dodge Charger2018-2023 Dodge Challenger2018-2023 Chrysler 300This bypass is required when installingthe Tazer in a vehicle on the above list.Click here for the Tazer + Double-Bypass bundle.The Double-Bypass can be used in older Chargers,Challengers and 300s to relocate the Tazer to the trunk. (Optional) MAKEMODELYEARDodgeChallenger2015 - 2021DodgeCharger2015 - 2021Note: 2018+ models require the use of a Double Bypass harness.Line Lock: Using one of the cruise control buttons/lever (depending on vehicle model), the BurnBox G2 uses the ABS valves to hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing is required! This is a perfect alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! Gone are the days of plumbing in external solenoids in the brake system, having to bleed the brakes and run wires through the firewall to a switch. Light Show: Using the keyfob or steering wheel buttons, turn on a light show that flashes the exterior lights in 9 different patterns.6 pre-set patterns3 customizable make-your-own patternsZ Automotive Programming Utility (for Windows PCs only) is used for firmware updates and for configuration:– Choose which exterior lights are included in the patterns– Create your own patterns– Choose which patterns to include or remove– Choose which pattern to start with– Save custom shows to file or load them from a file– Can be enabled for in-motion use for authorized users and off-road parade use; email tech support for instructionsButton Remapping: Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to BurnBox functions.INSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED ABOVE THE PARKING BRAKE.