| Shank Diameter | 3/4" |
|---|---|
| Overall Length | 3-7/8" |
| Brand | CLEVELAND |
| MPN | C30835 |
| California Prop 65 Warning | N |
| Country of Origin | US |
| NumberOfItems | 1 |
| Restricted States | [] |
| Style | Square End Mill |
| Grade | General Purpose |
| Item | Square End Mill |
| Type | Square End Mill |
| Application | For High-Temperature Alloys, Iconel, Stainless Steel and Titanium |
| List Number | RG6 |
| Number Of Flutes | 4 |
| Shank Dia. | 3/4" |
| Weight | 0.4300 |
| Length | 4.100 |
| Width | 1.000 |
| Depth | 1.000 |
| Diameter | 3/4" |
| Cutting Direction | Right Hand |
| Dimension Type | Fractional Inch |
| Features | Roughing End Mill, 0.75 in Milling Dia., Cobalt, Uncoated, Non-Co |
| Battery Included | No |
| End | Single |
| End Mill Application | Roughing |
| End Mill Cutting Type | Center |
| End Mill Material | Cobalt |
| End Mill Style | Square |
| Helix Angle | 30 Degrees |
| Length Of Cut | 1-5/8" |
| Milling Dia. | 3/4" |
| Single End/Double End | Single End |
| Corner Radius | 0 |
| Cutting Type | Center |
| UPC | 697334308355 |
Check the listing for details. Cleveland C30835 4-Flute Cobalt 8% Fine Square Single Roughing End Mill. Width: 1.000, Condition: New, Made in US. Listed at 88.16 USD. Roughing End Mill, 0.75 in Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of Cut 1.625 in, Overall Length 3 7/8 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable. Square End Mill.
You may also like
$64.96
Hertel 1/2" Diam, 3" LOC, 4 Flute Cobalt Ball End Mill Uncoated, Single End, ...
$62.12
Accupro 1/4", 5/8" LOC, 3/8" Shank, 3" OAL, 4 Flute, Solid Carbide Double Squ...
$99.99
NIAGARA 20640 TWO FLUTE SINGLE END MILL 2"D & 1-1/4 SHANK HSS TITANIUM - NEW
$25.61
Accupro 5/64" Diam 4 Flute Single End Solid Carbide 0.02" Corner Radius End M...
$25
NEW/OVERSTOCK! Solid Carbide Roughing End Mill, 3/8" Diam *See Notes*
$18.41
0.5mm Radius 50mm HRC45 Carbide AlTiSin Coated 2 Flute Ball Nose End Mill
$40.01
Hertel 9/16", 1-1/8" LOC, 1/2" Shank, 3-1/8" OAL, 2 Flute, HSS Square End Mil...
$23.87
OSG 414-187511 Square End Mill: 3/16" Dia, 3/8" LOC, 3/16" Shank, 2" OAL
$17.95
Faisa H98504312 Square End Mill .25" Diameter .5" LOC 2.25" Overall
$115.87
Niagara 17014843 Roughing End Mill Square End Mill: 3/4" Dia, 2" LOC, 3/4" Shank
$54.66
Value Collection 1/2" Diam, Coarse Pitch, 1-1/4" LOC, 4 Flute Cobalt Roughing...
$29.75
SGS 39605 Square End Mill: 1/16" Dia, 1/8" LOC, 1/8" Shank, 1-1/2" OAL