Check the listing for details. JAYO 10KG PLA PLA+ PETG SILK ABS 3D Printer Filament 1.75mm 1.1KG Black Spool. Condition: New. Listed at 86.64 USD. Filament Wire Diameter Tolerance Printing tempe Print speed Traction (KGF) Melting point Elongation at break Net weight Length PLA 1.75MM ±0.02MM 200-230℃ 50-100mm/s 11-16 7-9g/10min(190 ℃, 2,16 kg) 4% 1.1kg/Roll 340M PLA Carbon Fibre 200-230℃ 50-100mm/s 11-14 11-16g/10min(220 ℃, 2,16 kg) 4% 1kg/Roll 300M PLA+ 210-235℃ 50-100mm/s 9-12 4-8g/10min (190℃,2.16kg) 45% 1.1kg/Roll 340M PLA Meta 180-200℃ 50-100mm/s 9-12 8-10g/10min (190℃,2.16kg) 35% 1kg/Roll 330M PETG 220-250℃ 50-100mm/s 8-14 6-11g/10min (220℃,2.16kg) 210% 1.1kg/Roll 330M SILK PLA+ 200-230℃ 30-60mm/s 6-8 4-8g/10min (190℃,2.16kg) 200% 1kg/Roll 330M WOOD 170-190℃ 30-60mm/s 8-13 7-12g/10min (190℃,2.16kg) 4% 1kg/Roll 330M JAYO guarantees that following filaments are 100% Neatly wound -- PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.) How to store:1.If you leave your printer inactive for more than a few days, please retract the filament to protect your printer nozzle.2.To prolong the life of your filament, please put the unsealed filament back into the original vacuum bag and store it in a cool and dry place after printing.3.When storing your filament, please feed the loose end through the holes on the edge of the filament spool to prevent coiling so that it will feed properly the next time you use it.